crevis

GN-9386

EtherCAT ID Type Network Adapter


제품비교 담기

도움이 필요하세요?

샘플요청 견적문의
썸네일이미지 원본

주요특징


Interface Specification, GN-9386 (EtherCAT ID Type Network Adapter)

Adapter Type

Slave Node (EtherCAT)
Max. Expansion Slot 63 slots
I/O Data Size Max 128 bytes each slot
Max. Network Node 65,535
Baud Rate 100Mbps
Bus Connection 2 x RJ-45
Mac Address / IP Address Not needed
Other Serial Port RS232 for MODBUS/RTU, Touch Panel or IOGuide(Crevis Software)
Serial Configuration (RS232) Node : 1 (Fixed)
Baud Rate : 115200 (Fixed)
Data bit : 8 (Fixed)
Parity bit : No parity (Fixed)
Stop bit : 1 (Fixed)
Indicator 6 Status LEDs
1 Green/Red, Module Status (MOD)
1 Green, Network Status (RUN)
1 Red, Error Status (ERROR)
1 Green/Red Expansion I/O Module Statsus (IOS)
1 Green, System Power Status
1 Green, Field Power Status
Module Location Starter module left side of G-Series system
Field Power Detection About 14Vdc
General Specification
UL System Power Supply voltage : 24Vdc nominal, Class2
System Power

Supply voltage : 24Vdc nominal
Supply voltage range : 15~30Vdc
Protection : Output current limit (Min. 1.5A)
Reverse polarity protection

Power Dissipation 70mA @ 24Vdc
Current for I/O Module 1.5A @ 5Vdc
Isolation System power to internal logic : Non-isolation
System power I/O driver : Isolation
UL System Power Supply voltage : 24Vdc nominal, Class2
Field Power Supply voltage : 24Vdc typical (Max. 30Vdc)
* Field Power Range is different depending on IO Module series.
Refer to IO Module`s Specification.
Weight

167g

Module Size 54mm x 99mm x 70mm

NEWSLETTER

국내유일의 필드버스 전문회사 크래비스의 새로운 소식을 받아보세요!

뉴스레터 신청하기