crevis

GN-9222

PROFIBUS Network Adapter


제품비교 담기

도움이 필요하세요?

샘플요청 견적문의
썸네일이미지 원본

주요특징


Interface Specification, GN-9222 (PROFIBUS Network Adapter)

Redundancy

Not supported
Repeater Control Signal RS-485 Signal
Freeze mode Support
Sync mode Support
Auto baudrate Support
Fail safe mode Support
Station type Slave
FMS support Not supported
Max. Network Node 125 Nodes
Max. Expansion Slot 63 Slots
I/O Data Size Input : 244bytes / Output : 244bytes
Indicators 6 Status LEDs
1 Green/Red, Module Status (MOD)
1 Green/Red, Network Status (NET)
1 Red, Diagnostic Status (DIA)
1 Green/Red Expansion I/O Module Statsus (IOS)
1 Green, System Power Status
1 Green, Field Power Status
Communication Rate 9.6K ~ 12M (1.2Km~100m)
Communication Speed 9.6 ~ 12000 Kbps (Auto baudrate selection)
Bus Connection 9 Pin D-Sub Connector
Other Serial Port RS232 for MODBUS/RTU, Touch Panel or IOGuide
Serial Configuration (RS232) Node : 1 (Fixed)
Baud Rate : 115200 (Fixed)
Data bit : 8 (Fixed)
Parity bit : No parity (Fixed)
Stop bit : 1 (Fixed)
Module Location Starter module left side of G-Series system
Field Power Detection About 14Vdc
General Specification
UL System Power Supply voltage : 24Vdc nominal, Class2
System Power

Supply voltage : 24Vdc nominal
Supply voltage range : 16~30Vdc
Protection : Output current limit (Min. 1.5A)
Reverse polarity protection

Power Dissipation 100mA @ 24Vdc
Current for I/O Module 1.5A @5Vdc
Isolation System power to internal logic : Non-Isolation
System power I/O driver : Isolation
UL System Power Supply voltage : 24Vdc nominal, Class2
Field Power Supply voltage : 24Vdc typical (Max. 30Vdc)
* Field Power Range is defferent depending on IO Module series.
Refer to IO Module’s Specification.
Max. Current Field Power Contact DC 10A Max.
Weight

163g

Module Size 54mm x 99mm x 70mm

NEWSLETTER

국내유일의 필드버스 전문회사 크래비스의 새로운 소식을 받아보세요!

뉴스레터 신청하기