주요특징
- 다양한 산업용 프로토콜 (MODBUS TCP , EtherNet IP , PROFINET , EtherCAT , CC-Link IE , CC-Link IE Field Basic , DeviceNet , PROFIBUS , MODBUS RS485, CC-Link , CanOpen , BACnet ,MODBUS RTU) 제공
- 90종 이상 다양한 IO 모듈 구성 및 제공 (유니버셜 타입의 디지털 입력 모듈, 국내 최초 32 Points 슬라이스 I/O 모듈 , ERNI타입 커넥터 입출력 모듈)
- 컴팩트한 사이즈와 슬라이스 모듈 확장 방식으로 효율적인 공간 활용
- 사용자 편의를 고려한 Removable Terminal Block 방식 제공으로 전장 배선 및 설치 시 작업자에 쉽고 편리한 작업 환경 제공
| Interface Specification, GL-9087 (PROFINET NETWORK ADAPTER) | |
|
Adapter Type |
Slave node (Profinet) |
| Protocol | Profinet |
| Max. Expantsion Module | 10 slots |
| Max. Input / Output Data Size |
Max. Input 128 bytes / Output 128 bytes |
| Max Length Bus Line | Up to 100m from Ethernet Hub/Switch with twisted CAT5 UTP/STP |
| Max. Nodes | Limited by Profinet Specification. |
| Baud Rate | 100Mbps, Auto-negotiation, Full duplex |
| Interface Connector | RJ-45 socket * 2pcs |
| IP-Address Setup | Via Master Device Software |
| IAP Mode |
When DIP Switch 1 to 8 setting is 254 or 255 (Using only Internet Explorer / recommended version 11) |
|
Indicator |
4 LEDs 1 Green/Red, Module Status(MOD) 1 Green/Red, Network Status(NET) 1 Green/Red, Error Status(ERROR) 1 Green/Red Expansion I/O Module Status(IOS) 2 LEDs (each RJ45 Connector) 1 Yellow, Link/Active 1 Green, Not used |
| Module Location | Starter module left side of G-Series system |
| General Specification | |
| UL System Power | Supply voltage : 24Vdc nominal, Class2 |
| System Power |
Supply voltage : 24Vdc nominal Supply voltage range : 15~28.8Vdc Protection : Reverse polarity protection |
| Power Dissipation | 55mA typical @ 24Vdc |
| Current for I/O Module | 1.0A @ 5Vdc |
| Isolation |
System power to internal logic : Non-isolation |
| UL Field Power | Supply voltage : 24Vdc nominal, Class2 |
| Field Power |
Supply voltage : 24Vdc typical (Max. 30Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
| Max. Current Field Power Contact | DC 8A Max |
| Wiring | I/O Cable Max. 2.0㎟(AWG 14) |
| Torque | 0.8Nm(7 lb-in) |
| Weight | 76g |
| Module Size |
22mm x 109mm x 70mm |
| Environment Condition | Refer to ‘1. Environment Specification’ |
| Pin No | Signal Description |
| 1 | System Power, 24V |
| 2 |
System Power, Ground |
| 3 | F.G |
| 4 | Field Power, Ground |
| 5 |
Field Power, 24V |