주요특징
- 다양한 산업용 프로토콜 (MODBUS TCP , EtherNet IP , PROFINET , EtherCAT , CC-Link IE , CC-Link IE Field Basic , DeviceNet , PROFIBUS , MODBUS RS485, CC-Link , CanOpen , BACnet ,MODBUS RTU) 제공
- 90종 이상 다양한 IO 모듈 구성 및 제공 (유니버셜 타입의 디지털 입력 모듈, 국내 최초 32 Points 슬라이스 I/O 모듈 , ERNI타입 커넥터 입출력 모듈)
- 컴팩트한 사이즈와 슬라이스 모듈 확장 방식으로 효율적인 공간 활용
- 사용자 편의를 고려한 Removable Terminal Block 방식 제공으로 전장 배선 및 설치 시 작업자에 쉽고 편리한 작업 환경 제공
| Interface Specification, GN-9285 (CC-Link IE Field NETWORK ADAPTER) | ||
| 
             Adapter Type  | 
            Slave node (CC-Link IE Field Network) | |
| Max. Expantsion Module | 63slots | |
| Max. Data Size(Input + Output) | Max 128 bytes each slot | |
| Max. Nodes number | 120 | |
| Interface Connector | RJ-45 socket * 2pcs 8P8C Connector | |
| Other Serial Port | RS232 for MODBUS/RTU, Touch Pannel or IOGuide | |
| Serial Configuration (RS232) | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed)  | 
        |
| Indicator | 5 LEDs 1 Green/Red, Module Status (MOD) 1 Green, Current Running Status (NET) 1 Green, Error Status (ERROR) 1 Green/Red Expansion I/O Module Statsus (IOS) 1 Green, Field Power Status 2 LEDs (each RJ45 Connector) 1 Green, Active 1 Yellow, Link  | 
        |
| Module Location | Starter module left side of G-bus system | |
| Field Power Detection | About 14Vdc | |
| Ethernet Standard | IEEE 802.3ab(1000Base-T) | |
| Cable | Shield copper Cable(Cat.5e) | |
| Network Topology | Star / Line / Ring / Mixture of star and Line | |
| Station class | Intelligent Device station | |
| RX / RY Size | 256Bytes | |
| RWW / RWR Size | 1024Bytes | |
| General Specification | ||
| UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
| System Power | 
             Supply voltage : 24Vdc nominal  | 
        |
| Power Dissipation | 140mA typical @ 24Vdc | |
| Current for I/O Module | 1.5A @ 5Vdc(When using in ‘60℃ ~ 70 ℃’ temperature environment, the power dissipation is limited to 0.8A.)  | 
        |
| Isolation | System power to internal logic : Non-isolation System power I/O driver : Isolation  | 
        |
| UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
| Field Power | Supply voltage : 24Vdc typical(Max. 30Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification.  | 
        |
| Max. Current Field Power Contact | DC 10A Max | |
| Weight | 
             <165g  | 
        |
| Module Size | 54mm x 99mm x 70mm | |