주요특징
- 다양한 산업용 프로토콜 (MODBUS TCP , EtherNet IP , PROFINET , EtherCAT , CC-Link IE , CC-Link IE Field Basic , DeviceNet , PROFIBUS , MODBUS RS485, CC-Link , CanOpen , BACnet ,MODBUS RTU) 제공
- 90종 이상 다양한 IO 모듈 구성 및 제공 (유니버셜 타입의 디지털 입력 모듈, 국내 최초 32 Points 슬라이스 I/O 모듈 , ERNI타입 커넥터 입출력 모듈)
- 컴팩트한 사이즈와 슬라이스 모듈 확장 방식으로 효율적인 공간 활용
- 사용자 편의를 고려한 Removable Terminal Block 방식 제공으로 전장 배선 및 설치 시 작업자에 쉽고 편리한 작업 환경 제공
GL-9012 (DeviceNet Network Adapter Light) Communication Interface Specification |
||
Model Type |
GL-9012 | |
Adapter Type | Group 2 Only Slave | |
Max. Expansion Slot | 10 Slots | |
I/O Data Size | Max Input 36 bytes / Max Output 36 bytes | |
Max. Length Bus Line | Max.100m@500Kbps, Max. 250m@250Kbps, Max. 500m@125Kbps | |
Max. Network Node | 64 Nodes | |
Baud Rate | 125Kbps(Max. 500m) 250Kbps(Max. 250m) 500Kbps(Max. 100m) Auto Baud Supported |
|
Protocol | Poll, Bit-Strobe, Cyclic, COS | |
Node MAC ID Setup | DIP Switch | |
Terminating Resistance Setup | DIP Switch | |
Bus Connection | 5 Pin Open-Style Connector | |
Indicator | 4 Status LED 1 Green/Red, Module Status (MOD) 1 Green/Red, Network Status (NET) 1 Green, Terminating Resistance Status (TER) 1 Green/Red, Expansion I/O Module Status (IOS) |
|
Module Location | Starter module left side of G-Series system | |
General Specification | ||
UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
System Power |
Supply voltage : 24Vdc nominal |
|
Power Dissipation | Max. 20mA @ 24Vdc | |
Current for I/O Module | 1.0A @ 5Vdc | |
Isolation | System power to internal logic : Non-Isolation System power I/O driver : Isolation |
|
UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
Field Power | Supply voltage : 24Vdc typical (Max. 28.8Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module’s Specification. |
|
Max. Current Field Power Contact | DC 8A Max | |
Wiring | I/O Cable Max. 2.0mm2(AWG 14) | |
Torque | 0.8Nm(7 lb-in) | |
Weight | 67g | |
Module Size | 22mm x 109mm x 70mm |