DeviceNet Network Adapter, 32 bytes input and 32 bytes output

제품비교 담기

도움이 필요하세요?

샘플요청 견적문의
썸네일이미지 원본


- 슬라이스 타입의 필드버스 I/O ( DeviceNet , PROFIBUS , CANopen , CC-Link , EtherCAT , MODBUS RS232 , MODBUS RS485, PROfinet , EtherNET IP, MODBUS TCP, CC-Link IE Field)

- 소형 시스템 구성에 대한 가장 합리적인 가격을 제공

- 사용자의 편의를 위한 착탈식 방식의 터미널 블럭 제공

 - Test Pin용 홀울 제공하여 배선 후에도 입출력값 확인 가능
Interface Specifications, NA-9211(DeviceNet Adapter)

Adapter Type

Group 2 Only Slave
Max. Expansion Module 32 Slots
Max. Input Size NA-9211 : 32 bytes, NA-9212 : 252 bytes
Max. Output Size NA-9211 : 32 bytes, NA-9212 : 252 bytes
Max. Length Bus Line Max.100m@500Kbps), Max. 250m@250Kbps, Max. 500m@125Kbps
Max. Nodes 64 nodes
Communication Speed 125Kbps, 250Kbps, 500Kbps, auto baud supported
Network Portocol Poll, Bit-Strobe, Cyclic, COS
Interface Connector 5pin Open male connector
Node MAC ID Setup DIP Switch
Terminating Resistance Setup DIP Switch
Indicator 4 LEDs
1 Green/Red, Module Status (MOD)
1 Green, Network Status (NET)
1 Green, Terminating Resistance Status (TER)
1 Green/Red Expansion I/O Module Status (I/O)
1 Green, Field Power Status
Module Location Starter module – left side of FnIO system
Field Power Detection About 11Vdc
Configuration Tool IO Guide Pro
Configuration Port
Modbus/RS 232 Node 1 (fixed)
Baud Rate 115200 (fixed)
Data Bit 8 (fixed)
Parity Bit No parity (fixed)
Stop Bit 1 (fixed)
Temp Controller Support NA-9211 : Not supported / NA-9212 : Supported
General Specification
System Power
(from DeviceNet Cable)

Supply Voltage : 24Vdc nominal
Voltage Range : 16~28.8Vdc
Protection : Output Current Limit (Min. 1.5A) Reverse Polarity Protection

Power Dissipation 40mA Typical @24Vdc
Current for I/O Module 1.5A @5Vdc
Isolation DeviceNet to internal logic : Non-isolation
Internal logic to I/O driver : Isolation
Field Power Supply Voltage : 24Vdc nominal
Voltage Voltage Range : 11~28.8Vdc
Max. Current Field Power Contacts DC 10A Max
Weight 140g
Module Size 54.2mm x 99mm x 70mm


국내유일의 필드버스 전문회사 크래비스의 새로운 소식을 받아보세요!

뉴스레터 신청하기