주요특징
- 슬라이스 타입의 필드버스 I/O ( DeviceNet , PROFIBUS , CANopen , CC-Link , EtherCAT , MODBUS RS232 , MODBUS RS485, PROfinet , EtherNET IP, MODBUS TCP, CC-Link IE Field)
- 소형 시스템 구성에 대한 가장 합리적인 가격을 제공
- 사용자의 편의를 위한 착탈식 방식의 터미널 블럭 제공
- Test Pin용 홀울 제공하여 배선 후에도 입출력값 확인 가능
Interface Specification, NA-9289 (MODBUS/TCP) | |
Adapter Type |
Slave node (MODBUS/TCP, MODBUS/UDP Server) |
Max. Expansion Module | 63 Slots |
Max. Input Size | 252 bytes |
Max. Output Size | 252 bytes |
Max. Length Bus Line | Up to 100m from Ethernet Hub/Switch with twisted CAT 3 UTP/STP |
Max. Nodes | Limited by Ethernet Specification |
Baud rate | 10/100 Mbps, Auto-negotiation, Full duplex |
Protocol | MODBUS/TCP, MODBUS/UDP, HTTP, DHCP 10 TCP Connections |
Interface Connector | RJ-45 socket * 2pcs |
IP-Address Setup | Via DHCP/BOOTP or IOGuide(Crevis Configuration Software) |
IP-Address range | xxx.xxx.xxx.1 ~ 253 (User area) xxx.xxx.xxx.254 ~ 255 (Reserved for IAP Function) |
Serial Configuration (RS232) |
Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
Indicators | 5 LEDs 1 Green/Red, Module Status (MOD) 1 Green, Physical Connection (LINK) 1 Green, Exchange Data/Traffic Present (ACTIVE) 1 Green/Red Expansion Module Status (IOS) 1 Green, Field Power Status |
Module Location | Starter module left side of FnIO system |
Field Power Detection | About 11Vdc |
General Specification | |
System Power |
Supply voltage : 24Vdc nominal |
Power Dissipation | 100mA typical @24Vdc |
Current for I/O Module | 1.5A @5Vdc |
Isolation | System power to internal logic : Non-isolation System power to I/O driver : Isolation |
Field Power | Supply voltage : 24Vdc nominal Supply voltage range : 11~28.8Vdc |
Current in Jumper Contacts | DC 10A Max. |
Weight | 167g |
Module Size | 54mm x 99mm x 70mm |