주요특징
A PHP Error was encountered
Severity: Notice
Message: Trying to get property 'common_description_ko' of non-object
Filename: views/productView.php
Line Number: 196
Backtrace:
File: /crevis12/www/application/views/productView.php
Line: 196
Function: _error_handler
File: /crevis12/www/application/controllers/Product.php
Line: 446
Function: view
File: /crevis12/www/index.php
Line: 315
Function: require_once
A PHP Error was encountered
Severity: Notice
Message: Trying to get property 'common_description_en' of non-object
Filename: views/productView.php
Line Number: 196
Backtrace:
File: /crevis12/www/application/views/productView.php
Line: 196
Function: _error_handler
File: /crevis12/www/application/controllers/Product.php
Line: 446
Function: view
File: /crevis12/www/index.php
Line: 315
Function: require_once
| Interface Specification, RN- 9222 | |
|
Redundancy |
Not supported |
| Repeater Control Signal | RS- 485 Signal |
| Freeze mode | Support |
| Sync mode | Support |
| Auto baud rate | Support |
| Fail safe mode | Support |
| Station type | Slave |
| FMS support | Not supported |
| Number of Nodes | 125 Node /Max (DIP switch # 0 ~ 1 25) |
| Number of Expansion I/O slots | Max. 63 slots |
| I /O Data Size | Input : 244bytes / Output : 244bytes |
| Indicators | 6 LEDs 1 Green /Red, Module Status (MOD) 1 Green, Network Status (NET) 1 Green /Red, Diagnos tic Status (DIA) 1 Green /Red Expansion I /O Module Statsus (IOS) 1 Green, System Power Status 1 Green, Field Power Status |
| Communication Rate | 9.6K~12M(1.2Km~ 1 00m) |
| Communication Speed | 9.6 to 12000 Kbps (Auto baud rate selection) |
| Other Serial Port | RS232 for MODBUS/RTU, Touch Pannel or IO Guide |
| Serial Configuration (RS232) | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
| Module Location | Starter module left side of Rbus system |
| Field Power Detection | About 14Vdc |
| General Specification | |
| System Power |
Supply voltage : 24Vdc nominal |
| Power Dissipation | 100mA typical @24Vdc |
| Current for I/O Module | 1.5A @5Vdc |
| Isolation | System power to internal logic : Non-isolation System power to I/O driver : Isolation |
| Field Power | Supply voltage : 24Vdc nominal Supply voltage range : 11~28.8Vdc |
| Current in Jumper Contacts | DC 10A Max. |
| Weight | 165g |
| Module Size | 54mm x 99mm x 70mm |