주요특징
A PHP Error was encountered
Severity: Notice
Message: Trying to get property 'common_description_ko' of non-object
Filename: views/productView.php
Line Number: 196
Backtrace:
File: /crevis12/www/application/views/productView.php
Line: 196
Function: _error_handler
File: /crevis12/www/application/controllers/Product.php
Line: 446
Function: view
File: /crevis12/www/index.php
Line: 315
Function: require_once
A PHP Error was encountered
Severity: Notice
Message: Trying to get property 'common_description_en' of non-object
Filename: views/productView.php
Line Number: 196
Backtrace:
File: /crevis12/www/application/views/productView.php
Line: 196
Function: _error_handler
File: /crevis12/www/application/controllers/Product.php
Line: 446
Function: view
File: /crevis12/www/index.php
Line: 315
Function: require_once
| Interface Specification, RN- 9289 | |
|
Adapter Type |
Slave node (MODBUS/TCP,MODBUS/UDP Server) |
| Max. Expantsion Module | 63 slots |
| Max. Data Size (Input size + Output size) |
Max 1452 bytes |
| Max Length Bus Line | Up to 199m from Ethernet Hub/Switch with twisted CAT3 UTP/STP |
| Max. Nodes | Limited by Ethernet Specification |
| Baud Rate | 10/100Mbps, Auto-negotiation, Full duplex |
| Protocol | MODBUS/TCP,MODBUS/UDP,HTTP,DHCP.10 TCP Connections |
| IP-Address Setup | Via DHCP/BOOTP or IOGuide(Crevis Software) |
| IP-Address range | xxx.xxx.xxx.1 ~ 253 (User area) xxx.xxx.xxx.254 ~ 255 (Reserved for IAP Function) |
| Interface Connector | RJ-45 socket * 2pcs |
| Other Serial Port | RS232 for MODBUS/RTU, Touch Pannel or IOGuide |
| Serial Configuration (RS232) | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
| Indicator | 6 LEDs 1 Green/Red, Module Status (MOD) 1 Green, Physical Connection (LINK) 1 Green, Exchange Data/Traffic Present (ACTIVE) 1 Green/Red, Expansion I/O Module Statsus (IOS) 1 Green, System Power Status 1 Green, Field Power Status 2 LEDs (each RJ45 Connector) 1 Yellow, Link/Active 1 Green, Not used |
| Module Location | Starter module left side of R-BUS system |
| Field Power Detection | About 14Vdc |
| General Specification | |
| System Power |
Supply voltage : 24Vdc nominal |
| Power Dissipation | 120mA typical @ 24Vdc |
| Current for I/O Module | 1.5A @5Vdc |
| Isolation | System power to internal logic : Non-isolation System power to I/O driver : Isolation |
| Field Power | Supply voltage : 24Vdc typical (Max. 32Vdc) * Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
| Max. Current Field Power Contact | DC 10A Max |
| Weight | 162g |
| Module Size | 54mm x 99mm x 70mm |