주요특징
- 슬라이스 타입의 필드버스 I/O ( DeviceNet , PROFIBUS , CANopen , CC-Link , EtherCAT , MODBUS RS232 , MODBUS RS485, PROfinet , EtherNET IP, MODBUS TCP, CC-Link IE Field)
- 소형 시스템 구성에 대한 가장 합리적인 가격을 제공
- 사용자의 편의를 위한 착탈식 방식의 터미널 블럭 제공
- Test Pin용 홀울 제공하여 배선 후에도 입출력값 확인 가능
| Interface Specifications, NA-9222 | |
|
Redundancy |
Not supported |
| Repeater Control Signal | RS-485 Signal |
| Freeze mode | Support |
| Sync mode | Support |
| Auto baudrate | Support |
| Fail safe mode | Support |
| Station type | Slave |
| FMS support | Not supported |
| Number of Station | 125 Node/Max (DIP switch # 1~125) |
| Number of Expansion I/O slots | Max. 63 Slots |
| I/O Data Size | Input : 244bytes / Output : 244bytes |
| Indicators | 6 LEDs 1 Green/Red, Module Status (MOD) 1 Green/Red, Network Status (NET) 1 Red, Diagnostic Status (DIA) 1 Green/Red Expansion I/O Module Statsus (IOS) 1 Green, System Power Status 1 Green, Field Power Status |
| Baud Rate | 9.6K ~ 12M(1.2Km~100m) |
| Communication Speed | 9.6 to 12000 Kbps (Auto baudrate selection) |
| Other Serial Port | RS232 for MODBUS/RTU(Touch Pannel, IOGuide ...) |
| Serial Configuration (RS232) | Node : 1 (Fixed) / Baud Rate : 115200 (Fixed) / Data bit : 8 (Fixed) Parity bit : No parity (Fixed) / Stop bit : 1 (Fixed) |
| Module Location | Starter module - left side of FnIO system |
| Field Power detection | About 11Vdc |
| General Specification | |
| System Power |
Supply Voltage : 24Vdc nominal |
| Power Dissipation | 80mA Typical @24Vdc |
| Current for I/O Module | 1.5A @ Max. 5Vdc |
| Isolation | System Power to internal logic : Non-Isolation System power to I/O driver : Isolation |
| Field Power | Supply Voltage : 24Vdc nominal Supply Voltage Range : 11~28.8Vdc |
| Max. Current Field Power Contacts | DC 10A Max |
| Weight | 165g |
| Module Size | 54mm x 99mm x 70mm |