주요특징
| EGW-04 (4 CHANNELS, EtherCAT to Serial Gateway) | |||||||||
| EtherCAT Communication | |||||||||
|
Protocols |
EtherCAT | ||||||||
| Communication Interfaces | EtherCAT(In/Out) : RJ-45 x 2 | ||||||||
| Speed | 10/100 Mbps | ||||||||
| PDO mapping | According to user specifications. | ||||||||
| Max. Network Node | 65,535(Set by dip switch) | ||||||||
| Serial Communications | |||||||||
| Portocols | Uesr's protocol. | ||||||||
| Number of Channles | 4 channels(Block A 2 channels, Block B 2 channels) Block A and Block B are isolated. |
||||||||
| Communications |
|
||||||||
| Serial Signals | RS-232 : TxD, RxD |
||||||||
| Baud Rate | Up to 2,500,000 bps (default 115,200 bps) | ||||||||
| Data Bits / Stop Bits / Parity | Data Bits : 8(default) / Stop Bits : 1(default) / Parity : None(default), odd, even | ||||||||
| Termination Impedance | 120 ohm (Set by CoE/Web. RS-422/485 only.) | ||||||||
| Ethernet Conmmunication | |||||||||
| Protocols | Ethernet(Modbus TCP/UDP, Web, TBD) | ||||||||
| Communication Interfaces |
RJ-45 x 1 |
||||||||
| Speed | 10/100 Mbps | ||||||||
| IP Address | Set by CoE/Web(TBD) | ||||||||
| Digtal Input/Output | |||||||||
| Inputs / Outputs |
|
||||||||
| Voltage Level | 24Vdc | ||||||||
| Protections | Short Circuit Protection Overtemperature Protection |
||||||||
| TC(Thermocouple) Specification | |||||||||
| Inputs per module | 2 Channels | ||||||||
| Sensor Type | Type K ( -200 ~ 1200 ℃ ) | ||||||||
| Data Format | 16bits Integer | ||||||||
| General specification | |||||||||
| Isolation | Comm(Block A) ↔ Comm(Block B) ↔ IO ↔ Power(Field) ↔ Power(System) All communications, power, and input/output are isolated. |
||||||||
| Indicators | 32 LEDs (I/O 16 TBD) | ||||||||
| Communication Diagnostic Log | TBD | ||||||||
| PLC | TBD | ||||||||
| Power | Supply Voltage : 24Vdc nominal Power Dissipation : TBD Field Power : 24Vdc nominal All power supplies available through Field Power connection. |
||||||||
| Dimensions(W x D x H) | 80mm x 120mm(TBD) | ||||||||