주요특징
- 다양한 산업용 프로토콜 (MODBUS TCP , EtherNet IP , PROFINET , EtherCAT , CC-Link IE , CC-Link IE Field Basic , DeviceNet , PROFIBUS , MODBUS RS485, CC-Link , CanOpen , BACnet ,MODBUS RTU) 제공
- 90종 이상 다양한 IO 모듈 구성 및 제공 (유니버셜 타입의 디지털 입력 모듈, 국내 최초 32 Points 슬라이스 I/O 모듈 , ERNI타입 커넥터 입출력 모듈)
- 컴팩트한 사이즈와 슬라이스 모듈 확장 방식으로 효율적인 공간 활용
- 사용자 편의를 고려한 Removable Terminal Block 방식 제공으로 전장 배선 및 설치 시 작업자에 쉽고 편리한 작업 환경 제공
Interface Specification, GN- 9289 | ||
Adapter Type |
Slave node (MODBUS/TCP,MODBUS/UDP Server) | |
Protocol | MODBUS/TCP,MODBUS/UDP,HTTP,DHCP,10 TCP Connections | |
Sub-Protocol | Ethernet/IP * | |
Max. Expantsion Module | 63 slots | |
Max. Data Size(Input + Output) | Max input Data size 128 bytes / Max output Data size 128 bytes | |
Max Length Bus Line | Up to 100m from Ethernet Hub/Switch with twisted CAT5 UTP/STP | |
Max. Nodes | Limited by Ethernet Specification. | |
Baud Rate | 10/100Mbps, Auto-negotiation, Full duplex | |
Interface Connector | xxx.xxx.xxx.1 ~ 253 (User area) xxx.xxx.xxx.254 ~ 255 (Reserved for IAP Function) |
|
Interface Connector | RJ-45 socket 2pcs | |
IP-Address Setup | Via DHCP/BOOTP or IOGuide(Crevis Software) | |
IP-Address Range | xxx.xxx.xxx.1 ~ 253 (User area) xxx.xxx.xxx.254 ~ 255 (Reserved for IAP Function) |
|
Serial Port | RS232 for MODBUS/RTU, Touch Pannel or IOGuide | |
Serial Configuration (RS232) | Node : 1 (Fixed) Baud Rate : 115200 (Fixed) Data bit : 8 (Fixed) Parity bit : No parity (Fixed) Stop bit : 1 (Fixed) |
|
Indicator | 6 LEDs 1 Green/Red, Module Status (MOD) 1 Green, Physical Connection (LINK) 1 Green, Exchange Data/Traffic Present (ACTIVE) 1 Green/Red, Expansion I/O Module Statsus (IOS) 1 Green, System Power Status 1 Green, Field Power Status 2 LEDs (each RJ45 Connector) 1 Yellow, Link/Active 1 Green, Not used |
|
Module Location | Starter module left side of G-Series system | |
Field Power Detection | About 14Vdc | |
General Specification | ||
UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
System Power |
Supply voltage : 24Vdc nominal |
|
Power Dissipation | 70mA typical @ 24Vdc | |
Current for I/O Module | 1.5A @ 5Vdc ** | |
Isolation | System power to internal logic : Non-isolation System power I/O driver : Isolation |
|
UL System Power | Supply voltage : 24Vdc nominal, Class2 | |
Field Power | Supply voltage : 24Vdc typical (Max. 30Vdc) Field Power Range is different depending on IO Module series. Refer to IO Module`s Specification. |
|
Max. Current Field Power Contact | DC 10A Max | |
Weight | 162g | |
Module Size | 54mm x 99mm x 70mm |